MVS Weir Type - PVDF / PTFE / FEP / PFA Lined - Diaphragm Valve - F/E

MVS Weir Type - PVDF/PTFE/FEP/PFA Lined - Diaphragm Valves are available with wide range of material of construction and lining options, the quality of MVS Lined Diaphragm Valves helps to deliver the full potential of a simple yet versatile and effective design concept.

Broad Range of combinations of Valve Bodies, Linings and Diaphragms provide best solutions to suit almost any corrosive or abrasive fluid.

Because the flowing media does not come into contact with the working components of the valve, total service life is dramatically increased. The combination of low initial cost, fast, easy inline maintenance, long service life and inexpensive components, make MVS Diaphragm Valves an attractive solution for many applications.

Standards & M.O.C :

1) Size Range : 25 mm to 100 mm

2) Manufacturing & Design Standard :

    BS 5156

3) Testing Standard :

    BS 6755 Part - 1

4) Body - Bonnet - Compressor - M.O.C :

    C.I. to IS 210 Gr. FG 200 / 220

    S.G. Iron / Ductile Iron

    ASTM A 216 Gr. WCB (Cast Carbon Steel)

    ASTM A 351 Gr. CF8 (S.S. 304)

                                                                          ASTM A 350 Gr. CF8M (S.S. 316)

Applications :                                                 5) Body Lining :

Clean Liquids and Gases                                      PVDF (Poly-Vinylidene-Fluoride)

Corrosive Liquids and Gases                                 PTFE (Poly-Tetra-Fluoro-Ethylene)

Hazardous Liquids and Gases                               FEP (Fluorinated-Ethylene-Propylene)

Dry Materials                                                                            PFA (Per-Fluoro-Alkoxy)

Food / Pharmaceutical                                     6) Lining Thickness :

Vacuum Service                                                                     Minimum : 3 mm, Maximum : 4 mm

Viscous Liquids                                               7) Lining Test (Spark Testing) :

Fibrous Slurries                                                   15 KV DC

                                                                      8) Diaphragm (Pin Type)  :

                                                                          PTFE Backed by Neoprene Rubber

                                                                      9) End Connection : Flanged Ends

                                                                      10) Flange Drilling :

                                                                           ANSI B 16.5 Class 125 & 150

                                                                           BS 10 Table D, E & F or as required

                                                                       11) External / Internal Bonnet Finish :

                                                                            a. Anit Corrosive Paint

                                                                            b. Polyurethane Paint (PU Paint) on 

                                                                                request for protection against Corrosive 

                                                                                and Abrasive Fumes

MVS Two Piece Design - Full Port - FEP/PFA - Lined Ball Valve - 150# - F/E

FEATURES :

1) Full Port for Full Flow Efficiency

2) Two Piece Design for Zero leakage

3) Bolted Bonnet Construction

4) Integral Ball-Stem for Frequent Operation.

5) Replaceable Seat

6) Bubble Tight Shut Off.

7) Low Torque & Maintenance Free

STANDARDS & M.O.C :

1) Size Range : 25 mm to 150 mm

2) Manufacturing & Design Standard : BS 5351

3) Testing Standard : API 598

4) Body, Ball & Stem - M.O.C. :

S.G. IRON / DUCTILE IRON, ASTM A 351 GR. CF8 (S.S.304), ASTM A 351 GR. CF8(S.S.316)

5) Lining Options : FEP (Fluorinated-Ethylene-Propylene), PFA (Per-Fluoro-Alkoxy)

6) Lining Thickness : Minimum - 3 mm and Maximum - 4 mm

7) Lining Spark Testing : 15 KV DC

8) Flange Dimensions : As per ANSI B 16.5

9) Face to Face Dimensions : As per ANSI B 16.10

10) Operation : Manual Lever Operated

MVS Single Piece Design - Full Port - FEP/PFA -Lined Plug Valve-150#-F/E

STANDARDS & M.O.C :

1) Size Range : 25 mm to 150 mm

2) Manufacturing & Design Standard : BS 5158, BS 5353, API 599

3) Testing Standard : BS 6755 Part - 1, API 598

4) Body, Plug & Cover M.O.C :

S.G. Iron / Ductile Iron, ASTM A 351 GR. CF8 (S.S. 304), ASTM A 351 GR. CF8M (S.S. 316)

5) Body & Plug Lining : FEP (Fluorinated-Ethylene-Propylene), PFA (Per-Fluoro-Alkoxy)

6) Lining Thickness : Minimum - 3 mm, Maximum - 4 mm

7) Lining Spark Testing : 15 KV DC

8) Flange Dimensions : As per ANSI B 16.5

9) Face to Face Dimensions : As per ANSI B 16.10

MVS Split Body - Wafer / Lug Type - PTFE/FEP/PFA Lined Butterfly Valve

1) Size Range : 40 mm to 600 mm

2) Available Body Types : Wafer (Split Type) and Lugged (Split Type)

3) Manufacturing & Design Standard : API 609

4) Testing Standard : BS 6755 Part - 1

5) Face to Face : API 609, MSS-SP 67

6) Body M.O.C :

a. S.G. Iron

b. ASTM A 216 GR. WCB (C.S.)

c. ASTM A 351 GR. CF 8 (S.S. 304)

d. ASTM A 351 GR. CF 8M (S.S. 316)

7) Body Seat / Lining : PTFE

8) Unlined Disc M.O.C with Integral Stem/Shaft :

a. ASTM A 351 GR. CF 8 (S.S. 304)

b. ASTM A 351 GR. CF 8M (S.S. 316)

9) Disc Lining :

a. FEP (Fluorinated-Ethylene-Propylene)

b. PFA (Per-Fluoro-Alkoxy)

10) Operation :

a. Manual Lever Operated from 40 mm to 200 mm

b. Worm Gear Operated from 250 mm to 600 mm

11) Lining Thickness : Minimum - 3 mm and Maximum - 4 mm

12) Lining Spark Testing : 15 KV DC

13) Accessories (Optional) :

a. Rotary Actuator

b. Electro - Pueumatic and Pneumatic Valve Positioner 

c. Limit Switch

d. Gear Box

Coming Soon :

MVS FEP / PFA Lined Ball Check Valves -

25 mm to 100 mm

Dimensional Drawings :